Hyperliquid Peering
Reserved Peers for the Node You Run
You keep operating your own Hyperliquid node. A peering slot allowlists one of your node IPs on two Dwellir peers, with full mempool gossip and a 99.9% uptime SLA. $500 per month per peering slot, and no bandwidth charges.
What You Get
1 peering slot
A peering slot allowlists one of your node IPs on Dwellir’s peering infrastructure. You send the public IP, Dwellir reserves it on both peers.
2 Dwellir peers to connect to
Point your node at either one. The second is there so you can fail over.
Full gossip
Blocks and the full mempool, the same stream Dwellir’s own nodes consume.
99.9% uptime SLA
Measured per calendar month on gossip reachability from outside Dwellir’s network.
Flat $500/month per peering slot
No bandwidth or egress charges. Each node you peer needs its own slot.
Redundancy across hosts
Both peers run in one region. That gives you redundancy across hosts, not across datacenters. Need a peer in a second geography? Contact Dwellir before you subscribe.
Why Peering Matters
One peer feeds your node
Your Hyperliquid node keeps one peer connection that actually feeds it. If that peer is slow, your node is slow. If it drops, your node stops.
Public root peers are a dice roll
The community root peers from the gossipRootIps API are shared and oversubscribed. Their addresses change and their slots fill, so the peer that worked yesterday may not take you today.
Losing a peer means gaps
When your node loses its peer it stops advancing, falls behind the tip, and restarts sync. Downstream that means stale order books, missing fills, and gaps in whatever you write to disk.
A reserved slot removes the dice roll
Your node’s IP sits in reserved_peer_ips on both Dwellir peers. A slot is held for you whether or not the network is busy, and you know which machine you are pulling from.
Requirements
Ports 4001 and 4002 open to the public internet
Hyperliquid uses them for gossip. A node that rejects inbound connections on these ports is deprioritized by every peer in the network.
A static public egress IP
Dwellir allowlists that exact address. Dynamic IPs and large NAT ranges do not work.
hl-visor in non-validator mode on Mainnet
Peering is for the non-validator node you operate yourself.
Setup in Four Steps
Request access
Email support or DM Telegram with the public IP of each node you want to peer and the region it runs in. Expect your peer IPs within one business day.
Receive your peer IPs
Dwellir adds each node IP to reserved_peer_ips on both peers and returns two peer addresses. Subscribers also get a shared Telegram or Slack Connect channel with the team.
Point your node at them
Write the two peer IPs Dwellir sent you into ~/override_gossip_config.json in place of the placeholders. Keep try_new_peers false so the node talks to the Dwellir peers and nothing else. Set split_client_blocks to true if you need the mempool.
{
"root_node_ips": [{ "Ip": "<DWELLIR_PEER_1>" }, { "Ip": "<DWELLIR_PEER_2>" }],
"try_new_peers": false,
"chain": "Mainnet",
"reserved_peer_ips": []
}Restart and confirm
Restart hl-visor and confirm the node keeps applying blocks. The newest file under the data directory should be seconds old.
find ~/hl/data/replica_cmds -type f -newermt '-1 minute' | tail -5
Pricing
Hyperliquid Peering
Flat rate, per peering slot
- One slot allowlists one of your node IPs on 2 Dwellir peers, single region
- Full gossip, including the full mempool
- 99.9% uptime SLA per calendar month, per peer
- No usage, bandwidth, or egress charges
- Monthly billing, cancel any time
- Published, non-discriminatory pricing. Every subscriber gets the same peers
A peering slot allowlists one of your node IPs on Dwellir’s peering infrastructure. Peering two nodes takes two slots.
Frequently Asked Questions
Can I peer more than one node?
Yes. Each node needs its own peering slot at $500/month, because a slot allowlists one node IP. Each node also needs its own static egress IP.
What happens if I change my node’s IP?
Send the new address to Dwellir support by email or on Telegram, and keep the old one running until the change is confirmed. With try_new_peers set to false, an unallowlisted node has nothing to fall back to and stops syncing.
Do you throttle the mempool stream?
No. You receive full gossip, the same stream Dwellir’s own nodes consume.
Is peering required to use Dwellir’s Hyperliquid APIs?
No. The gRPC streaming API, Order Book WebSocket, and Info endpoint all run on Dwellir infrastructure, which sits on the same peering backbone. Buy peering only if you run your own nodes and want more reliable peers.
Is there preferential treatment?
No. Every peering subscriber gets the same peers, the same configuration, and the same priority. Dwellir’s own infrastructure runs on these peers on the same terms.
Peering Is Not a Hosted Node
Peering gives your node a reliable upstream. It does not give you data services. If you would rather consume Hyperliquid data than run a node, start here.
- gRPC streaming for blocks, fills, order statuses, and book diffs without operating a node
- Order Book WebSocket for live L2, L4, BBO, and trades
- Dedicated Node Cluster when Dwellir should run the nodes and every data service for you
Ready to Peer?
Send your node IP and region. Allowlisting is a manual change on the Dwellir side, so expect your peer IPs within one business day.
What our customers say
Denham Preen
Co-founder, Envio
"Dwellir's support is genuinely standout. We rely on them heavily across 80+ networks, and they've been rock solid, reliable infrastructure and a fantastic team to work with."
Dillon Hanson
Head of Business Development, DIA
"DIA leverages Dwellir's robust infrastructure as a primary and/or backup RPC provider to power oracle services across a wide range of blockchain networks. Their reliability and forward-thinking approach to supporting new and emerging ecosystems align closely with DIA's mission to provide resilient, scalable data infrastructure for Web3. This collaboration enhances DIA's redundancy model and strengthens DIA's ability to serve as a foundational layer for decentralized applications across the multi-chain landscape."
Norbert Veelenturf
Product Manager, Bitvavo
"We've been very happy so far with the services, currently using Dwellir mainly for our Polkadot ecosystem chains where we're very happy with the uptime, low latencies and the fast customer support."
Harald Heckmann
Head of Blockchain Engineering, Zeitgeist
"We can count on Dwellir in any situation. They are very reliable and skilled"
Jarmo Isotalo
CTO, Token Terminal
"We are very impressed! You are fast at deploying new nodes and we haven't experienced any downtime yet with Dwellir."
Wesley Charles Blake
DevOps Lead, Chronicle
"Chronicle Labs utilizes Dwellir as a key component of our decentralized RPC strategy. Their team has consistently impressed us with their responsiveness and commitment to service. We've found their pricing to be very fair, and their service response is excellent."
Anıl Küçükrecep
Senior Engineering Manager, Paribu
"Dwellir is more than just a service provider for Paribu Custody; they are a strategic partner. They consistently deliver tailored solutions, always standing by our side. Their reliability, speed, and proactive approach ensure seamless operations. Working with them truly makes a difference."
Ingo Rübe
Founder, KILT Protocol
"Dwellir has been a trusted and reliable partner since the early days. In addition to running a collator for KILT – contributing to the efficient functioning of the blockchain – Dwellir also runs RPC nodes enabling external parties to connect to the chain."
ar1ur3
Trady.xyz
"We process billions of onchain data responses through Dwellir every month, and the infrastructure keeps up with that sustained load. When we need help, we get fast, personal support from people who understand our setup and work with us directly."
Karel Balogh
Product Manager, SQD
"Dwellir has significantly simplified our complex multi-chain coverage, enabling us to focus on our product instead of infrastructure management. Their team is always responsive and ready to help, making the experience even better."
Rene Stefancic
Chief Operating Officer, Enjin
"Dwellir relieved our DevOps team. Their tailored infrastructure solutions helped us push past our usual stress points, so we could put our energy back into our core products."
Get your API key
and join other leading Web3 companies using Dwellir's infrastructure