Best BNB Smart Chain RPC Providers 2025: Complete Comparison Guide for Speed, Reliability, and Cost

BNB Smart Chain (BSC) processes over 12 million daily transactions with 0.75-second block times and 1.875-second finality, making it one of the most active EVM-compatible networks for DeFi, gaming, and Web3 applications. With its roadmap targeting 20,000+ TPS and sub-150ms finality by 2026, choosing the right RPC provider is critical for your dApp's performance, reliability, and cost efficiency. This guide compares the top 9 BNB Smart Chain RPC providers to help you make an informed decision.

What is BNB Smart Chain?

BNB Smart Chain (formerly Binance Smart Chain) is a high-performance Layer-1 blockchain optimized for speed, low costs, and EVM compatibility. Key specifications:

• Chain ID: 56 (mainnet), 97 (testnet)
• Current TPS: ~390 TPS (up to 2,545 TPS peak)
• 2026 Target: 20,000+ TPS for complex transactions
• Block Time: 0.75 seconds (reduced from 3 seconds in 2025)
• Finality: 1.875 seconds (targeting sub-150ms by 2026)
• Block Gas Limit: 100M gas/second (scaling to 1B)
• Native Token: BNB
• Consensus: Proof of Staked Authority (PoSA)
• Validators: 45 active validators
• Daily Transactions: 12.4M average (17.6M peak)
• Average Gas Fee: $0.01
• Total Addresses: 200M+ users
• Compatibility: Full EVM compatibility

BNB Chain's recent Lorentz and Maxwell hard forks delivered 4x faster block times and reduced malicious MEV by 95%, positioning BSC as a Nasdaq-scale settlement layer for institutional DeFi.

Why Your RPC Provider Matters

An RPC (Remote Procedure Call) provider acts as the gateway between your application and the BNB Smart Chain blockchain. Your provider choice affects:

• Response Time: Lower latency = faster user experience for high-frequency trading and gaming
• Uptime: 99.99% reliability determines if your dApp stays online during peak volumes
• Costs: Pricing models vary dramatically—from $1.56 to $20+ per million requests
• Scalability: Rate limits and burst capacity can throttle growth during viral moments
• Features: Archive nodes, WebSockets, trace/debug methods, and MEV protection vary by provider
• Global Performance: Geographic distribution impacts latency for international users

Top 9 BNB Smart Chain RPC Providers Compared

Quick Comparison Table

1. Dwellir - Industry's Cost Leader with Ultra-Low Latency

Pricing: $49 to $999/month | Model: 1 request = 1 credit | Cost per 1M: $1.96-2.00

Why Dwellir Leads: Dwellir eliminates compute unit complexity with the industry's most competitive pricing at just $1.96 per million requests—up to 90% cheaper than providers like Ankr ($20/M) and 83% cheaper than QuickNode ($12.25/M). Every RPC call costs one credit regardless of method type, making costs 100% predictable.

Unique Advantage - Ultra-Low Latency Shared Clouds: Dwellir offers a game-changing capability that sets it apart: the ability to run your code directly next to blockchain nodes in shared cloud environments. This co-location architecture delivers sub-10ms latency for critical applications by eliminating network round-trips. Perfect for high-frequency trading bots, MEV strategies, arbitrage systems, and gaming applications where microseconds matter.

Key Features:

• Simplest pricing: 1:1 pricing across all methods (trace, debug, standard calls)
• Cost leader: Lowest prices for both shared RPC ($1.96/M) and dedicated nodes
• Ultra-low latency: Run code next to nodes for sub-10ms response times
• Multi-chain excellence: 150+ blockchains with one API key
• 99.99% uptime SLA: Enterprise-grade reliability
• All protocols: HTTPS, WSS, and GRPC support
• Best overage rates: $2-5 per million (industry's lowest)
• No hidden fees: Archive data, trace, and debug at no premium

Plans:

• Starter: $5 one-time (500K/day, 20 RPS)
• Developer: $49/mo (unlimited requests, 100 RPS) = $1.96/M
• Growth: $299/mo (unlimited requests, 500 RPS) = $1.99/M
• Scale: $999/mo (unlimited requests, 2,000 RPS) = $2.00/M

Dedicated Nodes: $2,000/month for full dedicated BSC node with complete control, custom configurations, and zero shared throttling - 28% cheaper than Chainstack's $2,774/mo.

Best For: Cost-conscious teams, high-volume applications, multi-chain projects, and developers needing ultra-low latency access through shared cloud co-location.

Migration: ben@dwellir.com - Free migration assistance with dedicated onboarding.

2. BlockPI - Growing Infrastructure Provider

Pricing: $49 to $299+/month | Model: Compute units | Cost per 1M eth_call: $1.94-2.55

BlockPI offers competitive compute-based pricing with growing multi-chain support.

Key Features:

• Wide blockchain support (50+ chains)
• Compute unit pricing model
• Archive node access
• WebSocket support
• API analytics dashboard

Pricing:

• Elementary: $49/mo (500M CU) = $2.55/M eth_call
• Premium: $299/mo (4B CU) = $1.94/M eth_call

Note: Uses 26 CU multiplier for eth_call, adding pricing complexity vs. simple 1:1 models.

Best For: Growing projects comfortable with compute unit pricing.

3. Chainstack - Managed Infrastructure

Pricing: $49 to $990+/month | Model: Request units | Cost per 1M: $2.45-2.48

Chainstack provides managed node infrastructure with straightforward request-based pricing—simpler than compute units but 25% more expensive than Dwellir.

Key Features:

• Simple 1:1 request pricing (like Dwellir)
• Dedicated and unlimited node options
• Subgraph indexing via Bolt
• 24/7 enterprise support
• SOC 2 Type II certified
• Archive node access included

Pricing:

• Developer: Free (3M requests)
• Growth: $49/mo (20M requests) = $2.45/M
• Pro: $199/mo (80M requests) = $2.49/M
• Business: $349/mo (140M requests) = $2.49/M
• Enterprise: $990/mo (400M requests) = $2.48/M

Dedicated Nodes: $2,774/month with unlimited requests

Best For: Teams wanting managed infrastructure and willing to pay premium over Dwellir for included support.

4. Uniblock - Data-Focused Platform

Pricing: $49 to $549+/month | Model: Compute units | Cost per 1M eth_call: $2.94-2.99

Uniblock combines RPC access with data APIs for token and NFT information.

Key Features:

• Integrated data APIs
• Token metadata indexing
• NFT discovery tools
• Analytics dashboard
• Multi-chain support

Pricing:

• Growth: $49/mo (500M CU) = $2.94/M eth_call
• Pro: $199/mo (2B CU) = $2.99/M eth_call
• Business: $549/mo (5.5B CU) = $2.99/M eth_call

Note: Uses 30 CU multiplier, making it 50% more expensive than Dwellir.

Best For: Applications requiring integrated token/NFT data alongside RPC access.

5. dRPC - Decentralized RPC Network

Pricing: Pay-as-you-go from $6/month | Model: Compute units | Cost per 1M eth_call: $5.98-5.99

dRPC aggregates multiple node providers in a decentralized network with intelligent routing.

Key Features:

• Decentralized architecture (50+ node operators)
• Automatic failover across providers
• 7 geo-distributed clusters
• Up to 5,000 RPS capacity
• MEV protection available
• Debug and trace APIs
• 95+ blockchain support

Pricing:

• Free: $0 (40-250 RPS depending on demand)
• Premium: Starting $6 per 1M requests or 20M CU
• PAYG: $299/mo (1B CU) = $5.98/M eth_call
• PAYG: $599/mo (2B CU) = $5.99/M eth_call
• PAYG: $1,198/mo (4B CU) = $5.99/M eth_call

Note: 3x more expensive than Dwellir but offers decentralization benefits.

Best For: Projects prioritizing censorship resistance and decentralized infrastructure.

6. Alchemy - Feature-Rich Development Platform

Pricing: $5 to $2,000+/month | Model: Compute units (26 CU per eth_call) | Cost per 1M eth_call: $8.00-11.82

Alchemy provides the most comprehensive Web3 development platform with extensive tools beyond basic RPC access.

Key Features:

• Extensive developer dashboard
• NFT API with metadata indexing
• Token APIs and webhooks
• Notify (push notifications)
• Simulation and trace APIs
• Enhanced WebSocket subscriptions
• Advanced analytics and monitoring
• Composer (no-code tools)

Pricing:

• Free: 300M CU/month
• PAYG: From $5 (11M CU) = $11.82/M eth_call
• PAYG: $45 (100M CU) = $11.70/M eth_call
• PAYG: $215 (500M CU) = $11.18/M eth_call
• PAYG: $415 (1B CU) = $10.79/M eth_call
• PAYG: $2,000 (5B CU) = $8.00/M eth_call

Note: 4-6x more expensive than Dwellir but includes comprehensive tooling. Best value at $2K+ spend levels where cost drops to $8/M.

Best For: Teams needing full Web3 development platform with NFT APIs, webhooks, and advanced analytics. Worth the premium if you use the extra features.

7. GetBlock - Developer-Focused Platform

Pricing: $49 to $999+/month | Model: Compute units | Cost per 1M eth_call: $8.32-9.80

GetBlock transitioned to compute units in 2025, measuring actual computational resources consumed.

Key Features:

• 50+ blockchains supported
• Shared and dedicated nodes
• REST and WebSocket
• Archive access included
• Flexible rate limits
• Method-specific multipliers

Pricing:

• Free: Available with limits
• Start: $49/mo (50M CU) = $9.80/M eth_call
• Pro: $499/mo (600M CU, annual billing) = $8.32/M eth_call
• Enterprise: $999+/mo (customizable)

Note: Uses 10 CU multiplier but total cost still 4-5x higher than Dwellir.

Best For: Developers seeking flexible compute-based pricing who use GetBlock's additional tools.

8. QuickNode - Global Performance Network

Pricing: $49 to $999+/month | Model: API credits | Cost per 1M eth_call: $9.99-12.25

QuickNode operates a globally distributed network across 30+ regions with focus on performance.

Key Features:

• Global edge network (30+ regions)
• Add-ons marketplace (Token API, NFT API, etc.)
• GraphQL support
• Performance analytics dashboard
• Archive node access
• Team collaboration tools
• High burst capacity

Pricing:

• Free: 50M credits (limited testing)
• Build: $49/mo (80M credits) = $12.25/M eth_call
• Accelerate: $249/mo (450M credits) = $11.07/M eth_call
• Scale: $499/mo (950M credits) = $10.51/M eth_call
• Business: $999/mo (2B credits) = $9.99/M eth_call

Note: Uses 20 credit multiplier per eth_call. 5-6x more expensive than Dwellir for same request volume.

Best For: Applications requiring ultra-low latency globally and willing to pay premium for QuickNode's infrastructure.

9. Ankr - Multi-Chain Infrastructure

Pricing: $50 to $2,000+/month | Model: Compute units | Cost per 1M eth_call: $20.00

Ankr specializes in multi-chain infrastructure with advanced load balancing but has the highest per-request costs.

Key Features:

• 50+ blockchains supported
• Premium endpoints with caching
• RPC aggregation layer
• Token APIs included
• Advanced DeFi tools
• Enterprise customization

Pricing:

• Free: 500M CU/day (rate limited, ~30 RPS)
• PAYG: $50/mo (500M CU) = $20.00/M eth_call
• PAYG: $200/mo (2B CU) = $20.00/M eth_call
• PAYG: $500/mo (5B CU) = $20.00/M eth_call
• PAYG: $1,000/mo (10B CU) = $20.00/M eth_call
• PAYG: $2,000/mo (20B CU) = $20.00/M eth_call

Critical Note: Uses 200 CU multiplier per eth_call—10x higher than Dwellir's 1:1 pricing. At $20/M per eth_call, Ankr is 10x more expensive than Dwellir ($1.96/M). A project making 100M requests/month would pay $2,000 with Ankr vs. $199 with Dwellir—a 90% cost saving.

Best For: Only suitable if you specifically need Ankr's proprietary features and can justify 10x higher costs.

Comprehensive Pricing Comparison: The Real Cost of RPC Calls

To help you make informed decisions, here's a comparison of effective costs per million eth_call requests across providers and plans:

Key Insights:

1. Transparent 1:1 pricing delivers best value: Dwellir and Chainstack provide the most predictable costs at $1.96-2.49 per million calls with no multiplier complexity.

2. Dwellir offers unlimited requests: Unlike competitors with fixed allocations, Dwellir's Developer plan includes unlimited requests for $49/month, making the effective rate even lower for high-volume users.

3. Compute unit multipliers create 6-10x cost differences: Ankr's 200:1 ratio makes it 10x more expensive than Dwellir despite appearing cheaper at the base unit level.

4. BlockPI's Premium tier competitive at scale: At $1.94/M with their 26 CU multiplier, BlockPI Premium offers strong value for high-volume applications committed to $299/month.

5. Volume discounts vary significantly: Some providers (Alchemy, QuickNode) offer meaningful volume discounts, while others (Ankr, dRPC) maintain flat rates regardless of spend.

6. Trace/debug workloads amplify cost differences: With 100-500x multipliers on these methods, compute unit providers can cost 50-100x more than Dwellir's 1:1 pricing for analytics applications.

7. Entry-level plans favor simplicity: At the $49/month tier, Dwellir ($1.96/M unlimited) beats Chainstack ($2.45/M for 20M) and QuickNode ($12.25/M for 80M credits) on both price and capacity.

Pricing Model Breakdown: Simple vs. Compute Units

Understanding pricing models is crucial for budgeting your infrastructure costs and avoiding surprise bills.

Simple 1:1 Pricing (Dwellir, Chainstack)

How it works: 1 request = 1 unit, regardless of method complexity

Advantages:

• Predictable costs—always know your bill
• Easy to calculate ROI
• No surprise bills from method multipliers
• Simple budgeting and forecasting
• No need to track method distribution

Example:

• 100M requests = 100M credits
• At Dwellir Developer ($49): 100M requests included
• At Chainstack Growth ($49): 20M requests included = 5x less volume

Why It Wins: Eliminates the complexity and unpredictability of compute unit models. What you see is what you pay.

Compute Unit Pricing (Alchemy, QuickNode, Ankr, GetBlock, BlockPI, dRPC, Uniblock)

How it works: Each method has a multiplier (10-200x) based on computational resources consumed

Method Examples:

Real Cost Example - 10M eth_call requests:

The Hidden Cost: A project making 100M eth_call requests monthly would pay:

• Dwellir: $196
• Alchemy: $800-1,182 (4-6x more)
• QuickNode: $999-1,225 (5-6x more)
• Ankr: $2,000 (10x more!)

Disadvantages:

• ❌ Unpredictable billing—varies by method mix
• ❌ Complex calculations required
• ❌ Trace/debug methods can be 100-500x more expensive
• ❌ Hard to budget accurately
• ❌ Must track and predict method distribution
• ❌ Can lead to bill shock

Why Simple Pricing Matters for BSC

BSC's high transaction volume (12M+ daily) and DeFi focus means applications make millions of RPC calls. With compute unit pricing:

DeFi Protocol Example:

• 50M eth_call (price checks)
• 20M eth_getLogs (event monitoring)
• 10M eth_getTransactionReceipt (confirmations)
• 5M debug_traceTransaction (auditing)

Cost Comparison:

• Dwellir: 85M requests × $1.96/M = $166.60
• Alchemy: Complex calculation = ~$750-900
• QuickNode: Complex calculation = ~$850-1,100

Savings: $583-933 per month with Dwellir's simple pricing (82-85% cost reduction)

Dedicated Node Infrastructure

For applications requiring guaranteed resources, dedicated nodes eliminate shared infrastructure limitations.

Dwellir Dedicated Nodes:

• Industry-leading pricing: $2,000/month for full dedicated node
• Full control over node configuration
• Custom RPC methods and middleware
• Zero noisy neighbor issues
• Archive mode included
• Trace/debug APIs at no premium
• Ultra-low latency co-location available

Comparison:

• Dwellir: $2,000/mo (full dedicated node)
• Chainstack: $2,774/mo (full dedicated node)

When to Choose Dedicated:

• Consistent high throughput (5,000+ RPS)
• Compliance requirements (data sovereignty)
• Custom middleware or plugins needed
• Mission-critical applications
• Predictable performance requirements
• Budget for premium infrastructure ($2,000+/mo)

Why Dwellir's Dedicated Wins: 28% lower cost than Chainstack + better performance + no method premiums + ultra-low latency option.

Real-World Cost Examples

DeFi DEX Aggregator

Monthly Usage Profile:

• 200M eth_call requests (price quotes)
• 50M eth_getLogs (event monitoring)
• 30M eth_getTransactionReceipt (confirmations)
• 20M eth_getBlock (block data)
• Total: 300M requests/month

Provider Cost Comparison:

Analytics Platform with Archive Data

Monthly Usage Profile:

• 100M standard calls
• 10M debug_traceTransaction (detailed traces)
• 5M trace_block (block traces)
• Total: 115M requests with expensive methods

Provider Cost Comparison:

Key Insight: Dwellir's 1:1 pricing makes trace/debug workloads 98% cheaper than compute unit models.

NFT Minting Platform

Monthly Usage Profile:

• 50M eth_call (balance checks, approvals)
• 30M eth_sendRawTransaction (minting)
• 20M eth_getLogs (event monitoring)
• 10M eth_getTransactionReceipt (confirmations)
• Total: 110M requests/month

Provider Cost Comparison:

GameFi Application

Monthly Usage Profile:

• 150M requests/month average
• High burst traffic during gameplay
• Need 200 RPS sustained, 500 RPS burst
• WebSocket connections for real-time updates

Provider Cost Comparison:

Why Dwellir Wins for Gaming:

• Higher RPS limits critical for gameplay
• Unlimited requests (no overage risk during viral moments)
• 76-88% cost savings
• Ultra-low latency option for competitive games

Migration Guide

Migrating from Another Provider to Dwellir

Step 1: Audit Current Usage

• Log into your current provider dashboard
• Export last 3 months of usage data
• Identify:
  • Total requests per month
  • Request types (eth_call, getLogs, trace, etc.)
  • Peak RPS requirements
  • Geographic distribution of users

Step 2: Calculate Dwellir Savings

• Current monthly cost: $______
• Dwellir equivalent plan: $______
• Monthly savings: $______
• Annual savings: $______

Example:

• Current: Alchemy $2,000/mo
• Dwellir: Growth $299/mo
• Savings: $1,701/mo = $20,412/year (85% reduction)

Step 3: Sign Up and Test

1. Create Dwellir account (free)
2. Get API endpoint for BSC
3. Run parallel testing (keep existing provider active)
4. Test critical paths:
   • Transaction submission
   • Event monitoring (eth_getLogs)
   • WebSocket subscriptions
   • Trace/debug methods (if used)
5. Compare latency, reliability, and response accuracy
6. Typical testing period: 1-2 weeks

Step 4: Update Configuration

• Update RPC URLs in your application
• Update environment variables
• Deploy to staging environment first
• Monitor for 48 hours
• Deploy to production

Step 5: Monitor and Optimize

• Use Dwellir dashboard for usage analytics
• Set up alerts for RPS limits
• Monitor latency metrics
• Optimize request patterns if needed
• Consider ultra-low latency co-location for critical paths

Common Migration Concerns:

Will I experience downtime? No. Run providers in parallel during migration with fallback configurations. Typical migration results in zero downtime.

What if I need higher RPS? Start with Developer (100 RPS), upgrade to Growth (500 RPS), then Scale (2,000 RPS). Contact sales for higher limits.

Do I need to change my code? No. BSC RPC is standardized (EIP-1474). Only change the RPC endpoint URL—same JSON-RPC methods work identically.

What about WebSocket connections? Dwellir supports WSS for real-time subscriptions with the same WebSocket methods (eth_subscribe, etc.). No code changes required.

Can I keep my existing provider as backup? Yes! Many teams run multi-provider setups. Use Dwellir as primary (lowest cost), keep a secondary provider for redundancy, and implement automatic failover.

Advanced Features Comparison

WebSocket Support

Standard Subscriptions:

• newHeads (new blocks)
• logs (event filtering)
• newPendingTransactions
• syncing status

Debug and Trace APIs

Critical for:

• Block explorers
• Analytics platforms
• Auditing tools
• Development debugging
• Transaction forensics

Cost Impact Example (10M trace calls/month):

• Dwellir: 10M × 1 = $49 (Developer unlimited)
• Alchemy: 10M × 500 = 5B CU = ~$2,000
• QuickNode: 10M × 500 = 5B credits = ~$1,500-2,000

Savings: $1,451-1,951 (97% reduction) with Dwellir

Analytics and Monitoring

Alchemy Advantage: Most comprehensive analytics and monitoring platform—justifies premium for teams needing deep insights.

Conclusion: Best BNB Smart Chain RPC Provider in 2025

The best provider depends on your priorities:

Best Overall Value: Dwellir ⭐

Winner for: Cost optimization, predictable pricing, trace/debug usage, multi-chain apps, ultra-low latency

Why Dwellir Wins:

• Lowest cost: $1.96/M vs. $8-20/M competitors (75-90% savings)
• Simplest pricing: 1:1 model eliminates surprises
• Ultra-low latency: Unique shared cloud co-location for sub-10ms response
• Best for trace/debug: No premium pricing = 97% savings vs. compute models
• 99.99% uptime SLA: Enterprise reliability at startup prices
• 150+ blockchains: One key for all chains
• No hidden fees: Archive, trace, debug all included

Annual Savings Examples:

• Startup (50M req/mo): Save $2,400-5,412 vs. competitors
• Medium (200M req/mo): Save $12,024-21,012 vs. competitors
• Enterprise (500M req/mo): Save $24,012-48,012 vs. competitors

Best for Decentralization: dRPC

Winner for: Censorship resistance, decentralized infrastructure, geographic diversity

Strengths:

• Decentralized network (50+ operators)
• Automatic multi-provider failover
• MEV protection built-in
• Geographic routing
• No single point of failure

Trade-off: 3x more expensive than Dwellir but offers philosophical benefits of decentralization.

Best for Multi-Chain: Dwellir ⭐

Winner for: Building across multiple networks with consistent costs

Why Dwellir Wins:

• 150+ blockchains (most in industry)
• Single API key for all chains
• Consistent 1:1 pricing across networks
• Unified dashboard and billing
• Same reliability across all chains

Key Takeaways

• Dwellir leads on cost: $1.96/M vs. $8-20/M competitors (75-90% savings)
• Simple 1:1 pricing wins: Eliminates compute unit complexity and billing surprises
• Ultra-low latency advantage: Unique co-location capability for sub-10ms response times
• Trace/debug savings: 97% cheaper for analytics workloads vs. compute models
• Best SLA: 99.99% uptime at lowest cost
• Multi-chain leader: 150+ blockchains with one API key
• BSC-optimized: Ready for 2026's 20K TPS and sub-150ms finality targets

The right RPC provider should be invisible when it works—reliable, fast, and affordable. For BNB Smart Chain applications in 2025, Dwellir delivers the best combination of cost efficiency, performance, and reliability, making it the smart choice for startups, scaling projects, and enterprises alike.

Ready to save 75-90% on your RPC costs? Start with Dwellir today.

Additional Resources

• Dwellir Official Website
• Dwellir BSC Documentation
• BNB Chain Documentation

Last updated: November 3, 2025. Pricing and features subject to change. Always verify current pricing with providers.